Customized Cutting Solutions: Matching Metal Materials with Different Power Fiber Laser Cutting Machines

The wattage of the laser in a Metal fiber laser cutting machine can vary depending on the specific model and manufacturer. here 

is a general guideline for the wattage and corresponding cutting material thickness:

1，Low Power Fiber Laser Cutter (Up to 1kW):

Stainless Steel: Typically up to approximately 0.6-13 mm thickness.

Carbon Steel: Usually up to approximately 0.6-9 mm thickness.

Aluminum: Generally up to approximately 0.7-5.5 mm thickness.

Brass: Usually up to approximately 0.5-5.5 mm thickness.

2，Medium Power Fiber Laser Cutter(1kW - 3kW):

Stainless Steel: Typically up to approximately 0.4-35 mm thickness.

Carbon Steel: Usually up to approximately 0.4-40 mm thickness.

Aluminum: Generally up to approximately 0.3-38 mm thickness.

Brass: Usually up to approximately 0.5-35 mm thickness.

3，High Power Fiber Laser Cutter (3kW - 12kW):

Stainless Steel: Typically up to approximately 0.4-85 mm thickness.

Carbon Steel: Usually up to approximately 0.3-42 mm thickness.

Aluminum: Generally up to approximately 0.5-85 mm thickness.

Brass: Usually up to approximately 0.4-85 mm thickness.

Please note that these cutting thicknesses are approximate ranges and can vary based on the specific Fiber Laser Cutting

machine, material type, and cutting speed. Additionally, advancements in laser technology may have led to higher power 

machines capable of cutting thicker materials. For the most up-to-date information on the wattage and cutting capabilities 

of specific fiber laser cutting machines, it is best to consult with Our 24 Hours Online Service.